Sabrent 1Tb Rocket Q4 Nvme Pcie 4.0 M.2 2280 Internal Ssd Maximum Performance Solid State Drive R/W 4700/1800 Mb/S (Sb Rktq4 1Tb

Description:The Sabrent 1Tb Rocket Q4 Nvme Pcie 4.0 M.2 2280 Internal Ssd Delivers All The Advantages Of Flash Disk Technology With Pcie Gen4.0 X4 Interface. Based On Qlc Nand Flash Memory, Its Performance Speeds Can Reach Up To 4700 Mbs (Read) And 1800 Mbs (Write) When Using A Pcie Gen4 Motherboard. Using A Pcie Gen3 Motherboard Speeds Will Reach Up To 3300 Mbs (Read) And 3300 Mbs (Write). Power Consumption Is Much Lower Than Traditional Hard Drives, Making It The Best Embedded Solution For New Systems. The Sabrent 1Tb Rocket Q4 Nvme Pcie 4.0 M.2 2280 Internal Ssd Was Designed Using Pcie 4.0 Which Allows For Speeds Of Up To 4700 Mbs (Read) And 1800 Mbs (Write), Significantly Faster Than Pcie 3.0. Note: In Order To Take Advantage Of These Speeds, A Pcie Gen4 Motherboard Is Required. Otherwise It Will Be At Pcie Gen3 Speed At Max Of 3300Mbs. When Installing Any Nvme Pcie 4.0 Ssd Directly Onto A Pcie Gen4 Motherboard A Heatsink Is Required To Dissipate The Heat Generated By The Drives Extreme Speed Levels To Avoid Thermal Throttling And Maximize Performance. The Sabrent 2Tb Rocket Q4 Nvme Pcie 4.0 M.2 2280 Internal Ssd Is Backward Compatible With Pcie 3.0. Using A Gen3 Pcie Motherboard Will Enable The User To Reach Speeds Of Up To 3300 Mbs (Read) And 3300 Mbs (Write). Features:Nvme M.2 Pcie Gen4 X4 Interface.Built To The Pcie 4.0 Specification / Nvme 1.3 Compliant.Power Management Support For Apst / Aspm / L1.2.Supports Smart And Trim Commands.Supports Onfi 2.3, Onfi 3.0, Onfi 3.2 And Onfi 4.0 Interface.Advanced Wear Leveling, Bad Block Management, Error Correction Code, And Over-Provision.Upgradeable Firmware.Package Contents:1Tb Rocket Q4 Nvme Pcie 4.0 M.2 2280 Internal Ssd.User Manual.